This chart lists where the Celsius S24 , S28 and S36 can be mounted in each of our cases, and lists what kind of restrictions there are if any.
If there is a blank space that means there is no compatibility for that cooler in that case.
| Case | Celsius & Celsius+ S24 | Celsius+ S28 | Celsius S36 & Celsius+ S36 | Restrictions |
| Arc Midi R2 | Front* Top | *HDD cages must be removed/repositioned | ||
| Arc Mini R2 | Front* Top** | Top** | *Requires removal of HDD cages; Radiator cannot exceed 275mm in total length with the ODD bay in place **Requires removal of ODD cage | |
| Arc XL | Front* Top | Front* | Top | *HDD cages must be removed/repositioned |
| Core 1300 | Front* Top** | *Requires unused lower ODD slot **Max ODD device length of 150mm in upper bay; Max 34mm component height on upper 23mm of motherboard | ||
| Core 1500 | Front* Top** | *Lower HDD cage must be moved/removed; Upper HDD cage must be removed; Lower ODD slot must be unused **Max ODD device length of 150mm in upper bay; Max 34mm component height on upper 23mm of motherboard | ||
| Core 2300 | Front* Top** | *Push/pull supported using secondary mounting position, three fastening screws only per fan **Max ODD device length of 150mm in upper bay; Max 34mm component height on upper 23mm of motherboard | ||
| Core 2500 | Front* Top** | *Lower HDD cage must be moved/removed; Upper HDD cage must be removed **Max ODD device length of 150mm in upper bay; Max 34mm component height on upper 23mm of motherboard | ||
| Core 3300 | Front Top | |||
| Core 3500 | Front Top* | *Max 38mm component height on the upper 11mm of the motherboard | ||
| Define Mini | ||||
| Define Nano S | Front* Top** | *Reduces max GPU length to 284mm **Max motherboard component height of 35mm | ||
| Define R4 | Top* | * Low profile RAM recommended | ||
| Define R6/R6C - Standard Layout | Front Top Bottom*** | Front | Front*/**** Top** | *Requires removal of 5.25" mounting bracket. **Will have to be shifted to the fan rails closest to the motherboard; Reduces the max motherboard component height to 35mm; longer 5.25" devices won't be able to be used. ***This location only works if you're expanding. Otherwise the tubes will not reach CPU block. ****Can only be installed in pull configuration and secured to the case by 6 screw points |
| Define R6/R6C - Open Layout | Front Top Bottom*** | Front Top | Front*/**** Top** | *Requires removal of 5.25" mounting bracket. ** Longer 5.25" devices won't be able to be used. ***This location only works if you're expanding. Otherwise the tubes will not reach CPU block. ****Can only be installed in pull configuration and secured to the case by 6 screw points |
| Define S | Front Top | Front Top* | Front Top | *Low profile RAM recommended |
| Define S2 | Front Top Bottom* | Front Top** | Front Top | *This location only works if you're expanding. Otherwise the tubes will not reach CPU block. **Limits max motherboard component height to 36mm |
| Define XL R2 | Front* Top** | Top** | *HDD cages must be removed/re-positioned **Low profile RAM recommended | |
| Meshify S2 | Front Top Bottom* | Front Top | Front Top | *This location only works if you're expanding. Otherwise the tubes will not reach CPU block. |
| Vector RS - Open Layout | Front Top Bottom** | Front Top* | Front Top | *Reduces max motherboard component height to 35mm *This location only works if you're expanding. Otherwise the tubes will not reach CPU block. |
| Vector RS - Storage Layout | Front Top Bottom** | Front | Front Top* | *Reduces max motherboard component height to 35mm **This location only works if you're expanding. Otherwise the tubes will not reach CPU block. |
| Node 605 | ||||
| Era ITX | Top* | *Cannot install ATX PSUs: SFX or SFX-L PSU's will need to be shifted down to the lowest mounting point. | ||
| Case | Celsius & Celsius+ S24 | Celsius+ S28 | Celsius S36 & Celsius+ S36 |